Reliable CNC cutting for SA workshops

MultiCAM

MultiCAM supplies CNC routers and workshop systems for South African fabricators, sign shops and furniture makers who need clean cutting and steady output. From Germiston we help teams choose the right machine, set it up properly, and keep it working through day to day production.

See the machines Contact form

Machine Fit

MultiCAM helps workshops match bed size, spindle power and table style to the work they actually cut.

Practical Setup

The focus stays on usable setup notes, simple workflows and fewer surprises between drawing and finished parts.

Local Support

From Germiston to national installs, support covers commissioning, maintenance, training and day-to-day advice.

Production Growth

Options range from starter routers to production cells with dust handling, loading support and repeatable nesting.

CNC routers sized for real South African production

We supply CNC routers and related workshop systems for wood, plastics and soft metals, with options that suit entry workshops through to busy production cells. That includes machine tables, dust extraction support, vacuum holding options, tooling guidance and practical setup advice that helps operators get parts off the sheet with fewer errors. If your work changes often, we look at the material mix, sheet size, spindle use and floor space before recommending a machine.

Our team speaks plainly about cut quality, feed rates, nesting and maintenance because the right machine is only useful when the workshop can run it every week. For many SA clients the first question is not just what can it cut, but what will still work when power is unstable, dust is heavy, or humidity rises near the coast.

Routers for nesting, profile cutting and repeat work
Options for workshop tables, dust control and vacuum support
Tooling notes matched to common local materials
Guidance for operators who need clear, practical steps

Who we serve across the trade and fabrication sector

MultiCAM works with sign shops, cabinet makers, furniture workshops, joinery teams, plastic fabricators and general jobbing shops that need dependable cutting and sensible support. Some customers are replacing manual processes. Others are adding capacity so one operator can do the work of several cutting benches. We also help teams that need better nesting and a more organised flow from drawing to finished part.

Because each shop works differently, we do not push a one size answer. A small workshop in Germiston may need a compact router with simple dust handling, while a larger site in Pretoria or Durban may need a stronger setup with machine backup procedures and a more structured service plan. Our job is to match the machine to the workload, then keep the process practical for the people using it.

Furniture and cabinet production
Sign fabrication and display work
Plastic sheet cutting and routing
Soft metal applications where suitable

How we work from first query to first cut

Our process is straightforward. We start with the material list, part sizes, output target and available floor space. Then we discuss tooling, dust extraction, vacuum needs and the level of operator experience in the shop. That helps us narrow the machine choice and avoid surprises when the unit arrives on site.

From there we handle installation, commissioning and operator training so the team can run the machine properly from day one. We also assist with machine relocation, controller backups, preventive maintenance and dust system balancing. If a workshop needs help after a power interruption or wants a spindle checked before busy season, we keep the focus on practical turnaround and clear communication.

Machine installation and commissioning
Operator training and tooling setup
Preventive maintenance and spindle service
Vacuum leak checks and controller backups

CNC Machines

Compact CNC Router

A space-saving router for smaller workshops cutting boards, plastics and light aluminium parts.

Entry Nesting Router

An accessible nesting machine for first-time cabinet and furniture production teams.

Mid-Size Router

A balanced machine size for workshops needing more bed area without a full production footprint.

Production CNC Router

A higher-output router built for regular nesting shifts and repeat part throughput.

Heavy Duty Router

A rigid router for thicker boards, denser plastics and demanding daily use.

Auto Toolchange Router

This router reduces handling time by changing tools automatically between operations.

Manual Toolchange Router

A simpler router format for workshops that prefer lower complexity and controlled costs.

Installations

Germiston Cabinet Install

A cabinetry workshop moved from manual cutting to nested board production with cleaner part flow.

Read the project

Industries We Serve

Cabinet Making

Nested cabinet production benefits from repeat drilling, reliable sheet hold-down and tidy part flow.

Shopfitting

Shopfitters use routers for varied panels, counters, display parts and short lead times.

Sign Making

Sign workshops cut letters, panels, backing boards and trim parts across mixed materials.

Acrylic Fabrication

Acrylic work calls for clean edges, stable feeds and careful support across full sheets.

Furniture Components

Furniture makers benefit from nested shapes, drilling consistency and efficient board yield.

Door Manufacture

Door producers use CNC routers for skins, panel grooves and repeat cut accuracy.

Built for local conditions, not just showroom conditions

South African workshops face real-world issues that affect uptime. Load-shedding can interrupt a running job. Coastal humidity can affect tooling and storage. Dust builds up fast in cabinet and sign environments. Municipal compliance and workplace safety rules also matter, especially where extraction, noise and electrical installation are concerned. We take those factors into account when advising on setup and service.

That is why we speak carefully about table options, electrical protection, air supply if needed, and the way a machine should be cleaned and checked after long shifts. A CNC router that looks good on paper still has to survive Monday morning, month end pressure, and the day the operator is out sick. We help clients prepare for that reality.

Germiston base with service across key regions

Our Germiston base supports clients across Johannesburg East, Midrand, Pretoria East, Durban North and Cape Town North, with installs and service work carried out across South Africa. Being close to the East Rand gives us practical access to many fabrication and manufacturing areas, and we travel where the job requires it. That matters when a machine needs commissioning, a vacuum issue needs checking, or a relocation has to happen with limited downtime.

The team also supports remote planning by phone and message, so a workshop can share drawings, sheet sizes and machine questions before a site visit. If your business is in a busy industrial area or a growing production space further out, we keep the advice grounded in what can actually be done on your floor.

Germiston Support
Johannesburg East
Midrand Service
Pretoria East
Durban North
Cape Town North

Machine supply with setup, training and spares

MultiCAM has been serving the market since 2007, and the value of that experience shows in the way we talk to customers. We know that machine selection is only one part of the job. The rest is setup, training, spare parts planning, tooling choices and the small checks that stop avoidable downtime. Over time, that approach has helped us build long relationships with workshops that return when they expand or change direction.

The people behind the name include Marius Johannes van der Merwe, with support from Lerato Nkosi, Stefan Naude, Lesedi Ntanzi, Farieda Adams, Mpho Mtshali and Chantel Naidoo. Each role connects to a different part of the workflow, from sales and applications to service, installation and tooling. That means clients are not passed around without context.

Precision CNC cutting for South African workshops

Clients return because they want direct answers, careful setup and support that fits workshop reality. They also know that when a machine needs attention, the response should be calm and useful, not complicated. In a trade environment where every missed shift costs money, clear advice and proper follow through count for a lot.

Whether you are comparing entry level options or planning a production cell, we help you think through the details before you commit. If your team needs tooling help, training, a relocation or a maintenance visit, we keep the process simple and the communication open. That is how we keep workshops cutting day after day.

Clear machine naming and practical advice
Support that covers setup, service and tooling
Experience with SA workshop conditions
Service that respects your production schedule

From the notes

Router Size Basics

A simple look at matching bed size to the sheets and parts your team actually handles.

Nesting Yield Tips

Small layout changes can improve board usage without making production harder.

Vacuum Hold-Down

Good hold-down depends on spoilboard condition, zoning and realistic part sizes.

Spoilboard Care

Routine spoilboard care helps cutting depth stay predictable across the full table.

Questions we get asked

What does MultiCAM supply?

We supply CNC routers and related workshop systems for cutting wood, plastics and soft metals, plus tooling, table options, dust support and setup guidance.

Which areas do you support?

We work from Germiston and support clients across Johannesburg East, Midrand, Pretoria East, Durban North, Cape Town North and other areas nationwide.

What services do you offer after installation?

Our services include machine installation, commissioning, preventive maintenance, spindle service, vacuum leak checks, controller backups, operator training, tooling setup, machine relocation and dust system balancing.

Discuss your CNC routing job.

Contact form